What is validating identity wireless
These are only needed when you first setup the wireless connection.
If you change your password in the future your wireless connection will prompt you for the new password.
If a self-signed certificate (or any certificate from an untrusted CA) is in use, most clients will reject the connection since they cannot validate the server's identity.
For troubleshooting purposes, server certificate validation can be disabled on one or multiple clients, allowing those clients to connect regardless of the certificate in use.
And if I try again and return to the settings again, it is reset to Open/AES.
It also re-enables 802.1x in the Authentication tab if I've deselected it with WPA-PSK. I have no idea how I blundered into getting this working in the past. Yes -- I think that's covered in the first image up top, which is a screenshot of my router settings.
For more information about the wireless network, including coverage areas and general information see the Wireless Network Overview. In this window type in your Truman Student ID and then the Password that correlates with this ID (this id and password are also used for campus computers login and Tru View) and select .
You may notice that the “Truman Secure Wireless” network has been found, but due to specific settings needed for a complete connection to the Truman Network this will not allow a proper connection. – A free virus program courtesy of Truman State can be downloaded here.* You will not be prompted for your username and password or to validate the server certificate every time you connect.A fundamental component of RADIUS is a client's validation of the RADIUS server's identity.This is accomplished by hosting a certificate on the RADIUS server that has been validated by a trusted Certificate Authority (CA).(I tried TKIP later, when this didn't work, with the same results as described below.) So I set it to WPA-PSK / AES and entered my security key.It's mixed letters and numbers, 32 characters long. Still "waiting for reply" in the main screen, and "cannot find certificate" on the pop-up.My router settings: ipconfig/all results from the XP box: Again, this card a week ago.